2025年上海市吸油烟机产品质量监督抽查结果公布

Core Insights - The Shanghai Municipal Market Supervision Administration recently conducted a quality inspection of range hoods, revealing that out of 30 batches tested, 1 batch was found to be non-compliant with quality standards [1][3]. Group 1: Inspection Results - A total of 30 batches of range hood products were inspected, with 1 batch failing the quality test [1]. - The inspection covered products from 6 provinces and cities, including Shanghai, Zhejiang, Guangdong, and Anhui, with 24 batches from outside Shanghai and 6 from local manufacturers [1]. - The non-compliant product was identified during e-commerce sales, while all products from physical sales and local manufacturers passed the inspection [1]. Group 2: Non-compliance Details - The non-compliant product failed to meet the maximum total pressure efficiency requirement, which is set at a minimum of 19% according to GB/T 17713-2022 standards [4]. - The failure to meet this efficiency standard raises concerns about potential false advertising and consumer rights violations [4]. Group 3: Consumer Guidance - Consumers are advised to consider the airflow capacity of range hoods, with recommendations based on cooking habits and kitchen size [4]. - The importance of static pressure is highlighted, suggesting higher static pressure ratings for different building heights to prevent smoke backflow [4]. - Oil separation efficiency and noise levels are also critical factors for consumers when selecting range hoods [4]. Group 4: Purchasing Recommendations - Consumers should prioritize well-known brands over low-cost options and ensure to request invoices for legal protection [5]. - It is emphasized that range hoods should have the mandatory CCC certification mark to ensure safety compliance [5].