2025年上海市电子门锁产品质量监督抽查结果公布

Core Insights - The recent quality supervision inspection of electronic locks in Shanghai revealed that out of 20 batches tested, 3 batches were found to be non-compliant, primarily from e-commerce sales [1][3]. Group 1: Inspection Results - The inspection covered products from four regions: Shanghai, Beijing, Guangdong, and Zhejiang, with 10 batches from physical sales showing no non-compliance, while 3 out of 10 batches from e-commerce sales were non-compliant [1][2]. - Non-compliant products were reported to the respective market supervision departments for legal processing [1]. Group 2: Non-compliant Products - The non-compliant products included: - "Tuyere Active Monitoring Smart Lock" with safety requirement issues [3]. - "Smart Fingerprint Lock" with issues related to the axial static load of the latch [3]. - "Automatic Boutique Fingerprint Lock" also failed safety requirements [3]. - Specific non-compliance issues included failure to meet safety requirements (flammability) and excessive latch retraction under load [4]. Group 3: Compliance Standards - The safety requirement standard mandates that plastic materials used in locks should not ignite after being subjected to flame for 5 seconds [4]. - The axial static load standard requires that the latch should not retract more than 8mm under specified load conditions [4]. Group 4: Consumer Recommendations - Consumers are advised to choose well-known brands and products that clearly indicate compliance with standards [5]. - It is recommended to check the product's appearance and packaging for quality assurance [5].