辽宁省锦州市市场监督管理局通报2025年洗手液等产品质量监督抽查情况

Overall Summary - The quality supervision sampling conducted by the Jinzhou Market Supervision Administration included 100 batches of products from 27 manufacturers and 54 distributors, with a non-conformity rate of 6.3% for manufacturers and 7.4% for distributors [1]. Group 1: Product Categories - Hand Sanitizers: No quality issues were found during the inspection of hand sanitizers, which were tested according to national standards [2]. - Children's and Infant Clothing: No quality issues were found in the inspection of children's and infant clothing, tested for formaldehyde content, fiber content, and pH value [2]. - Building Waterproof Materials: No quality issues were found in the inspection of building waterproof materials, tested for heat resistance, elongation, and tensile strength [2]. - Student Uniforms: Quality issues were identified in the fiber content of student uniforms during the inspection [2]. - Building Steel Materials: No quality issues were found in the inspection of building steel materials, tested for bending, reverse bending, and tensile strength [2]. - Plastic Film Bags: No quality issues were found in the inspection of plastic film bags, tested for total migration, coliforms, and barrier performance [3]. - Dishwashing Detergents: No quality issues were found in the inspection of dishwashing detergents, tested for total bacterial count, coliforms, and formaldehyde [3]. - Insulation Materials: Quality issues were identified in the thermal conductivity of insulation materials during the inspection [3]. - Sanitary Napkins: No quality issues were found in the inspection of sanitary napkins, tested for bacterial count, fungal count, and water absorption rate [4]. - Excessive Packaging: Quality issues were identified in the packaging void ratio of products like mooncakes and tea during the inspection [4]. - Drones: Quality issues were identified in the noise levels of drones during the inspection [4]. - Coatings: Quality issues were identified in the washability and stain resistance of coatings during the inspection [5].