Nano Dimension (NasdaqCM:NNDM) Q3 2025 Earnings Call November 19, 2025 04:30 PM ET Company ParticipantsPurva Sanariya - Director of Investor RelationsDavid Stehlin - CEOJohn Brenton - CFOOperatorGood evening and welcome to the Nano Dimension Q3 2025 Financial Results Conference Call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key followed by zero. After today's presentation, there will be an opportunity to ask question ...

Nano Dimension (NasdaqCM:NNDM) Q3 2025 Earnings Call November 19, 2025 04:30 PM ET Company ParticipantsPurva Sanariya - Director of Investor RelationsDavid Stehlin - CEOJohn Brenton - CFOOperatorGood evening and welcome to the Nano Dimension third quarter 2025 financial results conference call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key followed by zero. After today's presentation, there will be an opportunity to a ...

Financial Data and Key Metrics Changes - Revenue for Q3 2025 was $26.9 million, representing a year-over-year growth of approximately 81% compared to $14.9 million in Q3 2024, primarily driven by the inclusion of Markforged, which contributed $17.5 million [16] - Gross profit for the quarter was $12.7 million, with an adjusted gross margin of approximately 47.4%, down from 50% in the prior year [16] - Operating expenses for the quarter were $29.2 million, a year-over-year increase of approximately 29% from $22.7 million in Q3 2024, mainly due to Markforged inclusion [16] - Adjusted EBITDA for the quarter was a loss of $16.6 million compared to a loss of $15.3 million in Q3 2024 [17] - Total cash, cash equivalents, and investment securities as of September 30, 2025, were approximately $515.5 million, down from about $551 million at the end of the prior quarter [17] Business Line Data and Key Metrics Changes - Nano Dimension's standalone revenue was approximately $9.4 million, down approximately 37% year-over-year, driven by strategic divestitures and softer demand amid macroeconomic uncertainties [16] - Operating expenses on a standalone basis decreased approximately 42% year-over-year, reflecting benefits from divestments and disciplined cost management [17] Market Data and Key Metrics Changes - The demand environment remains mixed, with pockets of strength and areas where customers are cautious in spending [10] - Key target segments include defense, aerospace, automotive, food and beverage, and next-generation networking, with wins across these areas [10][11] - The defense business continues to expand, driven by momentum across programs and increased adoption of the FX10 and FX20 platforms [11] Company Strategy and Development Direction - The company is focused on improving operations, driving toward profitability, and maximizing asset value [6] - A strategic alternatives review process is underway to evaluate options for maximizing shareholder value and unlocking technology potential [7][8] - The company aims to maintain customer focus, advance platform integration, and execute its roadmap to drive durable growth [14] Management's Comments on Operating Environment and Future Outlook - Management noted challenges from tariff uncertainties and cautious capital spending but highlighted strong improvements in operating expenses [9] - The company expects revenue for Q4 2025 in the range of $31.5 million to $33.5 million, representing nearly 21% sequential growth at the midpoint [18] - Adjusted EBITDA loss for Q4 is expected to be between approximately $12 million and $14 million, indicating a 22% improvement compared to Q3 [20] Other Important Information - The company repurchased approximately $5.6 million of shares during Q3 and an additional $11.5 million subsequent to the quarter end, believing shares are significantly undervalued [6] - The first formal guidance for Q4 2025 was provided, reflecting operational improvements and a disciplined approach to financial management [18] Q&A Session Summary - No questions were raised during the Q&A session, and the call concluded with management expressing confidence in the company's progress and future direction [23][24]

Nov 17, 2025 4:00 AM Eastern Standard Time Stratasys Expands Beyond Polymers, Adding Production Grade Metal Manufacturing Technology to its Offering with Tritone Technologies The transaction aims to further reduce barriers to AM adoption by eliminating complexity in choice and vendors that, at times, presents challenges for customers. Tritone's metal and ceramic offering is geared toward serial production and aligns with the Stratasys strategy to address this greater trend in the industry toward manufacturi ...

Financial Data and Key Metrics Changes - Consolidated revenue for Q3 2025 was $137 million, down 2.1% compared to Q3 2024, reflecting ongoing macro-driven capital equipment spending constraints [13] - GAAP gross margin was 41% for the quarter, down from 44.8% in the same period last year, while non-GAAP gross margin was 45.3%, down from 49.6% [14] - GAAP net loss for the quarter was $55.6 million, or $0.65 per diluted share, compared to a net loss of $26.6 million, or $0.37 per diluted share for the same period last year [16] - Non-GAAP net income for the quarter was $1.5 million, or $0.02 per diluted share, compared to a net income of $0.4 million, or $0.01 per diluted share in the same period last year [16] - Adjusted EBITDA was $5 million for the quarter, compared to $5.1 million in the same period last year [17] Business Line Data and Key Metrics Changes - Product revenue in Q3 was $94.1 million, flat compared to the same period last year, while service revenue was $42.9 million, down from $45.9 million [13] - Within product revenue, system revenue was $32.1 million, up from $31.7 million in the same period last year, and consumables revenue was $62 million, compared to $62.4 million last year [13] Market Data and Key Metrics Changes - The aerospace and defense sectors showed strong performance, with notable purchases from companies like Boeing and Honeywell, indicating continued confidence in the company's solutions [7][8] - The company secured significant investments from a leading U.S.-based technology company for large-scale prototyping and future production parts [9] Company Strategy and Development Direction - The long-term strategy focuses on trends reshaping manufacturing, including supply chain localization, next-generation mobility, and sustainability goals [6] - The company aims to leverage its technology to mitigate supply chain risks and address geopolitical issues, reinforcing the strategic value of localized manufacturing [6] Management's Comments on Operating Environment and Future Outlook - Management expressed optimism about specific verticals and applications, noting that the stability of recurring revenue streams provides a foundation for growth [20] - The company anticipates improvements in gross margin starting in Q4 2025, driven by price increases and ongoing cost reduction efforts [23][18] Other Important Information - The company ended the quarter with $255 million in cash and no debt, positioning itself well for value-enhancing opportunities [17] - A non-cash, non-recurring impairment charge of $33.9 million related to an investment in UltiMaker contributed to the larger GAAP net loss [16] Q&A Session Summary Question: Can you talk about the gross margin trajectory? - Management expects improvement in gross margin starting in Q4 2025, with continued enhancements into 2026 [23] Question: Are there significant opportunities with the social media AI company? - Management confirmed that they are focused on manufacturing use cases, particularly in aerospace and defense, and expect growth in these areas next year [25][27] Question: What is the status of production applications and sales cycles? - Management noted slight improvements in sales cycles, indicating a positive outlook for long-term opportunities [30] Question: What is the outlook for consumables revenue? - Management indicated that consumables are stable, with expectations for gradual increases as the focus shifts to high-end manufacturing applications [36] Question: How does the company view the dental opportunity? - Management expressed confidence in the dental market, highlighting recent strategic hires and partnerships that position the company well for growth [43][44]

Financial Data and Key Metrics Changes - Consolidated revenue for Q3 2025 was $137 million, down 2.1% compared to Q3 2024, reflecting ongoing macro-driven capital equipment spending constraints [13] - GAAP gross margin was 41% for the quarter, down from 44.8% in the same period last year, while non-GAAP gross margin was 45.3%, down from 49.6% [14] - GAAP net loss for the quarter was $55.6 million, or $0.65 per diluted share, compared to a net loss of $26.6 million, or $0.37 per diluted share in the same period last year [16] - Non-GAAP net income for the quarter was $1.5 million, or $0.02 per diluted share, compared to a net income of $0.4 million, or $0.01 per diluted share in the same period last year [16] - Adjusted EBITDA was $5 million for the quarter, compared to $5.1 million in the same period last year [17] Business Line Data and Key Metrics Changes - Product revenue in Q3 was $94.1 million, flat compared to the same period last year, while service revenue was $42.9 million, down from $45.9 million [13] - Within product revenue, system revenue was $32.1 million, up from $31.7 million in the same period last year, and consumables revenue was $62 million, compared to $62.4 million last year [13] Market Data and Key Metrics Changes - The aerospace and defense sectors showed strong performance, with notable purchases from companies like Boeing and Honeywell, indicating continued confidence in the company's solutions [7] - The company participated in Trident Warrior 25, showcasing its capabilities in distributed advanced manufacturing for military applications [8] Company Strategy and Development Direction - The long-term strategy focuses on trends reshaping manufacturing, including supply chain localization, next-generation mobility, and sustainability goals [6] - The company aims to leverage its technology to mitigate supply chain risks and address geopolitical issues, reinforcing the strategic value of localized manufacturing [6] Management's Comments on Operating Environment and Future Outlook - Management expressed optimism about specific verticals and applications, noting that the stability of recurring revenue streams provides a foundation for growth [20] - The company anticipates improvements in gross margin starting in Q4 2025, driven by price increases and cost reduction efforts [23] Other Important Information - The company ended the quarter with $255 million in cash and no debt, positioning itself well for value-enhancing opportunities [17] - A non-cash impairment charge of $33.9 million related to an investment in Ultimaker contributed to the larger GAAP net loss [16] Q&A Session Summary Question: Can you talk about the gross margin trajectory? - Management expects improvement in gross margin starting in Q4 2025, with a full impact from price increases anticipated [23] Question: Are there significant opportunities with the social media AI company? - Management is optimistic about growth in aerospace, defense, dental, and medical applications, with a focus on high-end manufacturing use cases [25][26] Question: What is the status of production applications and sales cycles? - Management noted slight improvements in sales cycles, with a focus on long-term opportunities in aerospace and defense [30] Question: What is the outlook for consumables revenue? - Consumables revenue is expected to stabilize, with growth anticipated as the company focuses on high-end manufacturing applications [35][36] Question: What are the expectations for operating expenses? - Management expects operating expenses to trend slightly down in Q4 2025, continuing tight cost management while investing in growth [38] Question: How does material pricing impact gross margins? - Management is working on improving material prices to enhance competitiveness, particularly in high-performance applications [39] Question: What is the potential in the dental market? - Management is optimistic about the dental market, highlighting recent leadership hires and strategic focus on restorative dental applications [43][44]

Financial Data and Key Metrics Changes - Consolidated revenue for Q3 2025 was $137 million, down 2.1% compared to Q3 2024, reflecting ongoing macro-driven capital equipment spending constraints [12] - GAAP gross margin was 41% for the quarter, down from 44.8% in the same period last year, while non-GAAP gross margin was 45.3%, down from 49.6% [13] - GAAP net loss for the quarter was $55.6 million, or $0.65 per diluted share, compared to a net loss of $26.6 million, or $0.37 per diluted share for the same period last year [15] - Non-GAAP net income for the quarter was $1.5 million, or $0.02 per diluted share, compared to a net income of $0.4 million, or $0.01 per diluted share in the same period last year [15] Business Line Data and Key Metrics Changes - Product revenue was $94.1 million, flat compared to the same period last year, with system revenue at $32.1 million, up from $31.7 million [12] - Service revenue was $42.9 million, down from $45.9 million in the same period last year, with customer support revenue at $29.3 million, compared to $31 million last year [12][13] - Hardware sales saw a year-over-year increase, particularly in aerospace and defense, with notable purchases from major industry players [6][8] Market Data and Key Metrics Changes - The aerospace and defense sectors showed strong performance, with significant customer purchases from companies like Boeing and Honeywell [6][8] - The company participated in Trident Warrior 25, showcasing its advanced manufacturing capabilities for military applications [7] - The dental vertical is being strategically enhanced with new leadership and product offerings, indicating growth potential in this market [10] Company Strategy and Development Direction - The long-term strategy focuses on trends reshaping manufacturing, including supply chain localization and sustainability goals [5] - The company aims to leverage its technology to mitigate supply chain risks and address geopolitical issues, reinforcing its strategic value proposition [5] - Investments in high-value verticals such as aerospace, defense, and dental are prioritized to drive growth and scale [6][10] Management's Comments on Operating Environment and Future Outlook - Management expressed confidence in the company's ability to navigate macroeconomic challenges and emphasized the importance of operational excellence and customer partnerships [4][5] - The outlook for 2025 includes expectations for revenue between $550 million and $560 million, with non-GAAP gross margin ranging from 46.7% to 47% [17] - Management highlighted the potential for improved gross margins in Q4 2025 due to implemented price increases [22] Other Important Information - The company ended the quarter with $255 million in cash and no debt, positioning itself well for future opportunities [16] - A non-cash impairment charge of $33.9 million related to an investment in Ultimaker contributed to the larger GAAP net loss [15] Q&A Session Summary Question: Can you talk about the gross margin trajectory? - Management anticipates improvement in gross margin starting in Q4 2025, with the full impact of price increases expected [21][22] Question: Are there significant opportunities with the social media AI company? - Management confirmed a clear strategy focused on manufacturing, with expectations for growth in aerospace, defense, and tooling applications [23][24] Question: What is the status of production applications and sales cycles? - Management noted slight improvements in sales cycles, with a focus on long-term opportunities in aerospace and defense [27][28] Question: What is the outlook for consumables revenue? - Management indicated that consumables are stable, with expectations for increased consumption as focus shifts to high-end manufacturing applications [32][33] Question: What is the outlook for operating expenses? - Management expects operating expenses to trend slightly down in Q4, continuing tight cost management while investing in growth [35] Question: How does material pricing impact gross margins? - Management acknowledged that material pricing is a variable but emphasized ongoing efforts to improve material costs and differentiate offerings [36] Question: What is the potential in the dental market? - Management expressed optimism about the dental opportunity, highlighting recent leadership recruitment and strategic focus on restorative dental applications [39][40] Question: What are the prospects for future purchases from the AI social media company? - Management noted the potential for significant future purchases as the company transitions from prototyping to manufacturing [41]

Q3 2025 Results Speakers Dr. Yoav Zeif, CEO Eitan Zamir, CFO Yonah Lloyd, CCO & VP IR Make additive work for you Conference Call and Webcast Link US Toll-Free Dial-In 1-877-407-0619 International Dial-In +1-412-902-1012 Live Webcast and Replay Forward -Looking Statements Cautionary Statement Regarding Forward -Looking Statements The statements in this slide presentation regarding Stratasys' strategy, and the statements regarding its projected future financial performance, including the financial guidance co ...

Core Insights - 3D Systems has introduced several new products in its Stereolithography (SLA) portfolio aimed at enhancing customer innovation and application needs, including the SLA 825 Dual printer, ArrayCast software, and new materials Accura SbF and Accura Xtreme Black [9][17] Product Innovations - The SLA 825 Dual is the most advanced large-frame SLA printer from 3D Systems, featuring a 20% larger build volume of 830 x 830 x 550 mm and dual-laser architecture, designed for high-performance industries such as transportation, motorsports, aerospace, and defense [10][11] - ArrayCast software allows for the creation of customized casting trees, improving efficiency by up to 10 times in production cycles and reducing manual labor by up to 20 times, thus eliminating bottlenecks in the casting process [12][19] - Accura SbF is a new SLA casting resin that is antimony-free, suitable for printing QuickCast patterns for various high-performance metals, offering fast print speeds and high dimensional stability [13][14] - Accura Xtreme Black is a high-performance prototyping resin that provides exceptional durability for complex assemblies and replicates the aesthetics of molded production parts, enhancing the prototyping workflow [15][16] Market Positioning - The introduction of these technologies reinforces 3D Systems' commitment to innovation and its leadership in the additive manufacturing industry, with nearly 40 years of experience in SLA technology [17][22] - The new products will be showcased at Formnext 2025, highlighting the company's comprehensive solutions for both polymer and metal additive manufacturing [17][22]

MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys (NASDAQ: SSYS) today announced a series of innovations across its FDM, SAF, P3â"¢ DLP, and software platforms, expanding material choices, improving throughput, and introducing new capabilities to help manufacturers streamline additive production. These new solutions will be on display at Formnext 2025, in Frankfurt, Germany, November 18-21. "By expanding our materials portfolio, accelerating print speeds, and introducing smarter sof. ...