TSMC(US:TSM) 傅里叶的猫·2025-05-26 14:25Core Viewpoint - The article provides an overview of TSMC's wafer fabrication capacity across various fabs, highlighting the production capabilities and expected changes in output for the upcoming quarters. Group 1: TSMC's Fab Capacity Overview - TSMC operates a total of 17 fabs located in Hsinchu, Tainan, Shanghai, Nanjing, Kaohsiung, Washington, and Arizona [2][4]. - The data presented in the article is measured in KWPM, indicating the monthly capacity in thousands of wafers [3]. Group 2: Hsinchu Fabs - Hsinchu has the highest number of fabs, totaling seven, with capacities of 30, 60, 41, 93, 135, and 3 KWPM for the respective fabs [4]. - It is expected that the production capacity will remain stable in the latter half of the year, with Fab 20 showing a slightly higher increase [4]. Group 3: Tainan Fabs - Tainan houses three fabs: Fab 6 (8-inch), Fab 14 (12-inch), and Fab 18 (12-inch), with capacities of 102, 338, and 242 KWPM respectively [5][6]. - A slight reduction in production is anticipated for Fab 6 and Fab 14, while Fab 18's capacity is expected to increase [5]. Group 4: Shanghai Fab - Shanghai has one fab, Fab 10, with a monthly capacity of 105 KWPM, which is expected to remain relatively stable in the upcoming quarters [7][8]. Group 5: Washington Fab - Washington has one 8-inch fab, Fab 11, with a capacity fluctuating between 23 and 30 KWPM [9][10]. Group 6: Taichung Fab - Taichung has one 12-inch fab, Fab 15, with a first-quarter capacity of 287 KWPM, which is expected to experience slight fluctuations [11][12]. Group 7: Nanjing Fab - Nanjing has one 12-inch fab, Fab 16, which is focused on mature processes (28nm and above) [13][14]. Group 8: Arizona Fab - Fab 21 in Arizona is under construction, with production of 4nm chips expected to begin by the end of 2024, indicating currently low capacity [15][16]. Group 9: Kaohsiung Fab - Fab 22 in Kaohsiung is planned for 2nm processes, with multiple phases of construction; currently, the capacity is at zero [17].