Financial Data and Key Metrics Changes - The company is guiding for growth in the current quarter and believes the upcycle has momentum [9] - Non-GAAP gross margin target is set at 65% and operating margin target at 40% [8] - Current OpEx guidance is approximately $356 million on a non-GAAP basis, which is considered the low point [24] Business Line Data and Key Metrics Changes - The company combined its 8-bit and 32-bit microcontroller divisions to address a product gap [6] - The Aerospace and Defense (A&D) segment has grown from about 11% to 18% of revenue, indicating strong performance [33] - The introduction of a 64-bit microcontroller is aimed at applications in industrial control and medical sectors [40] Market Data and Key Metrics Changes - Inventory levels are being corrected, with a noted difference of $103 million between distribution sell-through and sell-in last quarter [26] - Distributors had an average of 33 days of inventory, which is expected to decrease further [27] - The company does not see significant variation in inventory correction across different end markets [30] Company Strategy and Development Direction - The company is focused on improving customer relationships and has moved away from non-cancelable, non-reschedulable orders [8] - A new long-term business model has been unveiled, emphasizing a focus on customer engagement and market alignment [8] - The company is exploring attractive secular growth opportunities, particularly in connectivity and FPGA markets [32] Management's Comments on Operating Environment and Future Outlook - Management believes they have seen the bottom of the cycle and are optimistic about future growth [9] - There is a focus on rational conversations with customers to avoid overreactions in the current uncertain environment [50] - The company is seeing an increase in bookings activity, indicating a positive outlook for the future [52] Other Important Information - The company has closed its Fab two manufacturing facility to improve inventory management and margins [5] - Management has indicated that they are not pursuing a 300mm fab due to the diverse product portfolio [15] - The company has a proactive approach to managing potential tariff impacts by ensuring visibility in manufacturing locations [55] Q&A Session Summary Question: Are there any more changes needed in the manufacturing network? - The closure of Fab two was strategic, and there is ample room for expansion in other facilities [13] Question: What is the status of customer relationships? - About 90% of previously damaged relationships have been repaired through direct engagement [19] Question: How should OpEx be viewed going forward? - OpEx cuts are complete, and as revenue grows, OpEx as a percentage of sales is expected to decrease [25] Question: How far is the company from shipping to end demand? - The company expects the difference between sell-through and sell-in to converge over the fiscal year [26] Question: What is the outlook for the Aerospace and Defense business? - The A&D segment continues to grow and is a significant focus for the company [33] Question: How is the company positioned regarding tariffs and manufacturing? - The company has a low percentage of revenue built in China and is cross-qualifying products to mitigate risks [57] Question: What is the path to improving gross margins? - The company expects inventory reserve charges to decrease as inventory levels fall and revenue increases [67] Question: Is Microchip considering further acquisitions? - Small acquisitions are still on the table, but the focus is primarily on subscale opportunities [70]

Company Overview - Microchip Technology Incorporated is a leading provider of smart, connected, and secure embedded control solutions [3] - The company serves approximately 112,000 customers across various markets including industrial, automotive, consumer, aerospace and defense, communications, and computing [3] - Microchip is headquartered in Chandler, Arizona, and offers comprehensive product portfolios and development tools to reduce risk and lower total system costs [3] Upcoming Event - The company will present at the TD Cowen 53rd Annual Global Technology, Media, and Communications Conference on May 28, 2025, at 10:50 a.m. Eastern Time [1] - Presenters will include Mr. Richard Simoncic, Chief Operating Officer, and Mr. Eric Bjornholt, Senior Vice President and Chief Financial Officer [1] - A live webcast of the presentation will be available on the Microchip website [1]

Market Expansion and Product Development - In July 2024, the company entered the 64-bit mixed-signal microprocessor market, expanding beyond the 32-bit architecture[25]. - The company targets the 8-bit, 16-bit, and 32-bit mixed-signal microcontroller markets, with a focus on providing cost-effective embedded control solutions[27]. - The company has a broad product portfolio that supports key growth trends in AI/ML, data centers, edge computing, and IoT[22]. - The company’s embedded control products compete on technical innovation, performance, and a comprehensive suite of development tools[62][63]. Financial Performance and Sales - Approximately 36% of sales in fiscal 2025 came from products produced at the company's own wafer fabrication facilities located in the U.S.[50]. - In fiscal 2025, 45% of net sales were derived through distributors, down from 47% in fiscal 2024, while direct sales accounted for 55% in fiscal 2025 compared to 53% in fiscal 2024[59]. - Arrow Electronics, the largest distributor, contributed 10% of net sales in fiscal 2025 and 12% in fiscal 2024, with no other distributor or direct customer exceeding 10% of net sales[59]. - Approximately 64% of the company's net sales in fiscal 2025 came from products produced at outside wafer foundries[101]. - The company operated at below normal capacity levels in fiscal 2024 and fiscal 2025, resulting in unabsorbed capacity charges of $40.7 million and $173.0 million, respectively[117]. Cost Management and Operational Efficiency - The closure of Fab 2 is expected to generate annual cash savings of approximately $90 million, with an additional $25 million in savings from reduced compensation costs in Fab 4 and Fab 5[43][47]. - In fiscal 2025, approximately 67% of assembly and test requirements were performed in internal facilities, with plans to increase internal capacity capabilities[51]. - The company plans to invest $880 million over the next several years to expand silicon carbide (SiC) and silicon production capacity at Fab 5[45]. - The company has paused its multi-year $800 million expansion plan at Fab 4 through fiscal 2026, planning to resume as the business outlook improves[44]. Supply Chain and External Factors - The company relies on third-party contractors for approximately 33% of its assembly and testing requirements in fiscal 2025[101]. - The company faces risks related to supply chain disruptions, including geopolitical tensions and trade restrictions, which may limit access to necessary materials[100]. - The U.S. imposed additional tariffs on imports from China and other countries in March and April 2025, which may impact operating results[96]. - The semiconductor industry is characterized by intense competition, with significant price erosion and rapid technological changes impacting market dynamics[61]. Regulatory and Compliance Issues - Environmental regulations impact operational costs, with potential liabilities arising from non-compliance with chemical and gas regulations[66][67]. - The company must navigate compliance with various regulations regarding privacy, data protection, and cybersecurity, which could pose operational risks[90]. - Compliance with government regulations, such as the Cybersecurity Maturity Model Certification, is essential for maintaining contracts and could increase operational costs[137]. - The California Consumer Privacy Act (CCPA) and its amendments, effective January 1, 2023, impose increased privacy and security obligations on entities handling personal data[173]. Employee and Workforce Management - The company maintains a global workforce of approximately 19,400 employees, emphasizing that employees are its greatest strength[68]. - The company invests in employee development through training programs, mentorship, and tuition reimbursement, fostering a culture of continuous improvement[72][73]. - Competition for qualified personnel has intensified, particularly for roles in management, technical, and AI-related fields, which could delay product development and adversely affect net sales[148][149]. - A global workforce reduction initiated in Q4 fiscal 2025 may negatively impact employee morale and the company's attractiveness as an employer[150]. Cybersecurity and Technology Risks - The company has experienced cyber-attacks, including a significant incident in August 2024 that temporarily impacted manufacturing operations[156]. - Continuous improvements to cybersecurity measures have been implemented, but there is no assurance that future attacks can be fully prevented[158]. - The company does not have specific insurance coverage for cybersecurity matters, which may leave it vulnerable to liabilities arising from breaches[162]. - Security vulnerabilities in products may expose the company to increased cybersecurity risks, particularly in applications that process data[163]. Legal and Tax Liabilities - The company faces potential income tax liabilities from ongoing disputes, with possible penalties up to $410 million related to Malaysian tax assessments[195]. - The company received assessments from German Tax Authorities that could result in income taxes and penalties up to $92 million if upheld[196]. - The company is subject to significant financial resources for defending its intellectual property rights, which may be adversely affected by foreign laws[184]. Environmental and Social Governance (ESG) - The company has publicly announced environmental goals, including greenhouse gas emissions reduction and achieving net zero carbon emissions, which may expose it to scrutiny and risks[213]. - New climate-related regulations, such as California's disclosure requirements, could impose additional costs and risks on the company[214]. - Customer demands for conflict-free minerals may result in additional expenses and potential loss of sales if compliance cannot be met[209]. - Failure to meet evolving stakeholder expectations regarding ESG could adversely affect the company's business and stock price[216].

Core Insights - Microchip Technology is launching PolarFire® Core FPGAs and SoCs to address rising Bill of Material (BOM) costs, optimizing performance and budgets for developers [1][3] - The new PolarFire Core devices can reduce customer costs by up to 30% by eliminating integrated serial transceivers while maintaining low power consumption and high reliability [1][2] Product Features - PolarFire Core families are designed for various markets including automotive, industrial automation, medical, communication, defense, and aerospace, featuring Single Event Upset (SEU) immunity and a quad-core, 64-bit RISC-V® microprocessor [2] - The devices are pin-to-pin compatible with the full line of PolarFire FPGAs, enhancing value for cost-sensitive applications [2] Market Context - The FPGA market is facing challenges as many manufacturers have raised prices, prompting OEMs to seek cost-effective solutions [3] - Microchip's PolarFire Core devices are positioned to provide market-leading solutions at favorable price points, addressing both price and power budget challenges [3] Development Support - PolarFire Core devices are supported by Microchip's Libero® SoC Design Suite, SmartHLS™ compiler, and VectorBlox™ Accelerator SDK, facilitating rapid RISC-V application development [4] - Compatibility with existing PolarFire FPGA and SoC development boards is emphasized to expedite silicon development [4] Availability - Information regarding pricing and purchasing can be obtained through Microchip sales representatives or their official website [5]

Core Viewpoint - The analog chip market demonstrates resilience and vitality within the global semiconductor industry, characterized by long life cycles, high margins, and weak cyclicality, particularly in automotive electronics, industrial control, and communication devices [1] Industry Overview - The semiconductor industry is cyclical, with analog chips currently emerging from an 8-quarter downturn, expected to enter an upturn starting Q1 2025, driven by improving demand in industrial and automotive markets [1] - Recent quarterly reports from major analog chip manufacturers reveal two core trends: structural recovery alongside market differentiation, with robust demand in high-end sectors like automotive and industrial, while consumer electronics remain sluggish [1][2] - Supply chain and geopolitical risks are escalating, prompting international manufacturers to adjust capacity layouts in response to tariff policies and domestic substitution pressures [1] Texas Instruments (TI) - TI reported Q1 2025 revenue of $4.069 billion, a year-on-year increase of 11%, exceeding market expectations, with net income rising 7% to $1.179 billion [2][3] - The analog products segment generated $3.21 billion in revenue, up 13.2% year-on-year, while embedded processing revenue declined slightly [4][5] - TI's growth is attributed to a diversified product portfolio and strong demand in automotive electrification, industrial automation, and 5G infrastructure, despite a weak consumer electronics market [5] - TI's Q2 2025 revenue guidance is optimistic, projecting a midpoint of $4.35 billion, reflecting a 13.8% year-on-year increase [8] Infineon - Infineon reported Q2 FY 2025 revenue of €3.591 billion, a 1% decline year-on-year, with profits down 15% to €601 million [9][10] - The company anticipates a slowdown in growth for FY 2025 due to geopolitical uncertainties affecting consumer confidence and investment willingness [10] - Infineon plans to reduce investments from €2.5 billion to approximately €2.3 billion in response to market conditions [10] NXP Semiconductors - NXP's Q1 2025 revenue was $2.835 billion, down 9% year-on-year, reflecting ongoing weakness in the automotive chip market [12][14] - The company reported a significant increase in inventory turnover days, indicating worsening inventory conditions [14] - NXP's CEO expressed cautious optimism regarding the company's ability to navigate challenging market environments while maintaining profitability [14][15] STMicroelectronics (ST) - ST's Q1 2025 revenue fell 27.3% year-on-year to $2.517 billion, with net profit down 89.1% [18][19] - The company is focusing on innovation and cost control while restructuring its manufacturing layout to improve efficiency [23][24] - ST anticipates a revenue decline of 16.2% year-on-year for Q2 2025, with a focus on maintaining R&D investments [23][24] Renesas Electronics - Renesas reported a 12.2% year-on-year decline in sales for Q1 2025, with significant drops in automotive and industrial segments [28][31] - The company is cautious about future performance, predicting a revenue decline of approximately 15.8% year-on-year for Q2 2025 [33] ON Semiconductor - ON Semiconductor's Q1 2025 revenue dropped 22.4% year-on-year to $1.445 billion, resulting in a net loss of $486.1 million [34][35] - The company is focusing on maintaining financial discipline and pursuing long-term strategies despite current market challenges [35][36] - ON Semiconductor has initiated a restructuring plan that includes a 9% workforce reduction, impacting approximately 2,400 employees [38] Microchip Technology - Microchip reported Q4 2025 revenue of $970.5 million, a 26.8% year-on-year decline, with a net loss of $156.8 million [40][41] - The company has successfully implemented inventory reduction strategies, indicating a potential turning point in the long down cycle [41] - Microchip anticipates a revenue range of $1.02 billion to $1.07 billion for the upcoming quarter, reflecting a cautious but optimistic outlook [41][42]

Core Insights - The National Security Agency (NSA) has introduced the Commercial National Security Algorithm Suite 2.0 (CNSA 2.0) to establish quantum-resistant cryptographic standards, urging data centers and computing markets to become post-quantum ready within two years [1][3] - Microchip Technology has developed the MEC175xB embedded controllers featuring post-quantum cryptography, enhanced security features, and low power consumption to meet evolving security demands [1][2] Company Overview - Microchip Technology Inc. is a leading provider of smart, connected, and secure embedded control and processing solutions, serving over 100,000 customers across various markets including industrial, automotive, consumer, aerospace, defense, communications, and computing [10] Product Features - The MEC175xB family employs a modular approach for developers to adopt post-quantum cryptography efficiently, ensuring long-term data protection without compromising existing functionality [2][3] - These controllers incorporate NIST-approved post-quantum cryptographic algorithms, including Module-Lattice-Based Digital Signature Algorithms (ML-DSA) and Module-Lattice-Based Key-Encapsulation Mechanism (ML-KEM), implemented in immutable hardware to block potential attack paths [3][4] - The controllers feature secure boot and firmware update schemes configurable for CNSA 1.0 or 2.0, enhancing system integrity and authenticity [4] Technical Specifications - The MEC175xB controllers are powered by an Arm Cortex-M4F processor running at 96 MHz, with 480 KB of SRAM and various connectivity options including I3C and optional USB 2.0 Full-Speed interface [4] - They are compatible with MPLAB X Integrated Development Environment (IDE) and supported by example projects and development boards [6] Availability - The MEC175xB controllers are currently available as part of Microchip's early adopter program, with further information accessible through Microchip's sales representatives or website [7]

Core Insights - The National Security Agency (NSA) has introduced the Commercial National Security Algorithm Suite 2.0 (CNSA 2.0) to establish quantum-resistant cryptographic standards, urging data center and computing markets to become post-quantum ready within two years [1] - Microchip Technology has developed the MEC175xB embedded controllers that support immutable post-quantum cryptography, aimed at helping system architects meet evolving security demands [1][2] Company Overview - Microchip Technology Inc. is a leading provider of smart, connected, and secure embedded control and processing solutions, serving over 100,000 customers across various markets including industrial, automotive, consumer, aerospace, defense, communications, and computing [8] Product Features - The MEC175xB family employs a modular approach for developers to adopt post-quantum cryptography efficiently, ensuring long-term data protection without compromising existing functionality [2] - These controllers are designed with NIST-approved post-quantum cryptographic algorithms, secure boot solutions, and an advanced Enhanced Serial Peripheral Interface (eSPI) [2] - The controllers incorporate CNSA 2.0-compliant Module-Lattice-Based Digital Signature Algorithms (ML-DSA), Merkle stateful hash-based Leighton-Micali Signature (LMS) verification, and Module-Lattice-Based Key-Encapsulation Mechanism (ML-KEM) [3] Technical Specifications - The MEC175xB controllers feature an Arm® Cortex®-M4F processor running at 96 MHz, 480 KB of SRAM, and various connectivity options including I3C® and optional USB 2.0 Full-Speed interface [4] - They include secure boot and firmware update schemes configurable for CNSA 1.0 or 2.0 or hybrid-based signature verification, enhancing system integrity and authenticity [4] Development Tools - MEC175xB controllers are compatible with MPLAB® X Integrated Development Environment (IDE) and supported by example projects available in the Secure Document Extranet (SDE) [6] Availability - The MEC175xB controllers are currently available as part of Microchip's early adopter program, with additional information accessible through Microchip's sales representatives or their website [7]

Core Viewpoint - The analog chip market demonstrates resilience and vitality within the global semiconductor industry, characterized by long life cycles, high margins, and weak cyclicality, making it indispensable in sectors like automotive electronics, industrial control, and communication devices [1] Group 1: Market Dynamics - The semiconductor industry is cyclical, with analog chips currently emerging from an 8-quarter downturn, expected to enter an upturn starting Q1 2025, driven by improving demand in industrial and automotive markets [2] - Recent quarterly reports from major analog chip manufacturers reveal two core trends: structural recovery alongside market differentiation, with robust demand in high-end sectors like automotive and industrial, while consumer electronics remain sluggish [2][3] - Supply chain and geopolitical risks are escalating, prompting international manufacturers to adjust capacity layouts in response to tariff policies and domestic substitution pressures [2] Group 2: Company Performance Insights - Texas Instruments (TI) reported Q1 2025 revenue of $4.069 billion, exceeding market expectations, with a 7% increase in net profit, driven by strong performance in the industrial and automotive sectors despite a decline in consumer electronics [3][5] - Infineon's Q2 FY2025 revenue was €3.591 billion, a 1% decline year-over-year, with a 15% drop in profit, reflecting challenges from tariff uncertainties impacting consumer confidence and investment [8][10] - NXP's Q1 2025 revenue was $2.835 billion, down 9% year-over-year, with significant declines in automotive and industrial chip demand, highlighting the ongoing weakness in the semiconductor sector [11][12] - STMicroelectronics reported Q1 2025 revenue of $2.517 billion, a 27.3% decline year-over-year, with net profit plummeting 89.1%, indicating severe challenges in the automotive and industrial segments [17][18] - Renesas Electronics experienced a 12.2% drop in sales to ¥308.8 billion in Q1 2025, with a 30% decrease in net profit, primarily due to weak demand in the automotive market [24][29] - ON Semiconductor's Q1 2025 revenue fell 22.4% to $1.4457 billion, resulting in a net loss of $486.1 million, reflecting the broader market downturn and operational challenges [31][35] Group 3: Future Outlook - TI anticipates Q2 2025 revenue guidance of $4.35 billion, indicating a 13.8% year-over-year increase, supported by strong industrial growth [7] - Infineon expects a slowdown in growth for FY2025, with revised revenue forecasts due to geopolitical uncertainties affecting demand [10][11] - NXP projects Q2 2025 revenue between $2.8 billion and $3 billion, reflecting cautious optimism amid ongoing market challenges [15][16] - STMicroelectronics aims for Q2 2025 revenue of $2.71 billion, with a focus on innovation and cost control to navigate the current downturn [21][22] - Renesas plans to maintain a cautious approach in Q2 2025, projecting revenue fluctuations and a focus on inventory management [30] - ON Semiconductor is adjusting its business strategy to adapt to changing market demands, with a focus on high-growth areas like SiC technology [36][37]

Summary of Microchip (MCHP) FY Conference Call - May 14, 2025 Company Overview - Microchip is a leading semiconductor company, ranked among the top five microcontroller suppliers globally, with a significant presence in the industrial market, holding the third-largest market share in industrial MCUs [2][41] - The company has a diverse portfolio, with 60% of its MCU offerings being 32-bit and higher architectures, alongside a solid analog and FPGA portfolio [2] Core Insights and Arguments Financial Performance and Outlook - Microchip has experienced a cyclical downturn but is optimistic about recovery, indicating a 7.7% sequential growth forecast for the June quarter [3][4] - The company is undergoing an inventory reduction program, expecting to decrease inventory by approximately $350 million in the current fiscal year [5] - Gross margins have bottomed out, with a long-term target of 65% non-GAAP gross margin and 40% non-GAAP operating margin [5] Market Dynamics - The company reported a book-to-bill ratio greater than one for the first time in nearly three years, indicating stronger order activity [7][10] - There is a distinction between demand pull-ins due to tariff expirations and genuine cyclical recovery, with the latter being more significant [7][12] - Inventory levels at distributors have decreased significantly, leading to increased reordering activity [11] Pricing Strategy - Microchip anticipates a mid-single-digit percentage decline in average pricing, which is more aggressive than some peers, driven by a strategy to gain market share [21][23] - The company is focusing on aggressive pricing for new designs to maintain competitiveness [23][24] Product Strategy and Innovation - Microchip is enhancing its total solution strategy (TSS) to increase attach rates of additional products per anchor product, with an average of four to five additional products per design [30][32] - The introduction of a new 64-bit microprocessor family based on RISC V architecture aims to provide more flexibility for customers, complementing existing ARM-based products [35][36] Competitive Landscape - The MCU market remains competitive, particularly in the 8-bit segment, where Microchip faces increased competition from Chinese vendors [41][43] - Microchip's strength lies in industrial and automotive sectors, where customers prefer comprehensive platforms over individual components [45] Megatrends and Growth Areas - Megatrend revenues have historically grown at twice the rate of Microchip's overall business, representing 47% of revenues in fiscal 2024 [46][48] - The company sees significant opportunities in AI and machine learning, particularly in robotics and predictive maintenance applications [49][50] Aerospace and Defense Segment - The aerospace and defense segment has shown resilience, growing from 11% to 18% of total revenue, driven by strong demand for radiation-hardened products [53][55] Manufacturing and Capacity - The closure of the Fab 2 facility is expected to streamline operations without significant capacity loss, as production will shift to other fabs [58][59] - Microchip maintains a balanced approach with 35% to 40% of wafer needs met internally, with plans for gradual capacity expansion [62][63] Other Important Insights - The company is closely monitoring inventory levels and expects to increase production as inventory falls below 200 days [66][67] - Significant inventory reserve charges are anticipated to decrease as inventory levels normalize, positively impacting gross margins [70][73] This summary encapsulates the key points discussed during the conference call, highlighting Microchip's strategic direction, market dynamics, and financial outlook.

CHANDLER, Ariz., May 13, 2025 (GLOBE NEWSWIRE) -- Microchip Technology (Nasdaq: MCHP) today announces that registration is now open for its MASTERs Conference in North America, the premier technical training event for embedded design engineers. This year marks the 25th anniversary of the annual MASTERS Conference, once again taking place at the Fairmont Scottsdale Princess in Scottsdale, Arizona, from August 4–7, 2025. MASTERs is short for "Microchip Annual Strategic Technical Exchange and Review" and is ta ...