Core Points - BYD Auto Industry Co., Ltd. has filed a recall plan with the State Administration for Market Regulation due to safety concerns related to certain vehicle models [1][4][5] Group 1: Recall Details - Recall Number S2025M0165I: A total of 44,535 units of the 2015 Tang series vehicles produced between March 28, 2015, and July 28, 2017, are being recalled due to a design issue with components that may cause the drive motor controller to malfunction, potentially leading to circuit board burning and loss of electric drive mode [1][4] - Recall Number S2025M0166I: A total of 71,248 units of the Yuan Pro electric vehicles produced between February 6, 2021, and August 5, 2022, are being recalled due to manufacturing issues that may result in improper installation of the battery sealing gasket, leading to reduced waterproofing and potential water ingress into the battery [1][5] Group 2: Remedial Actions - For the Tang series recall, BYD will authorize dealers to update the software for the affected vehicles, changing the discharge method to eliminate safety risks [1][4] - For the Yuan Pro recall, BYD will use specialized sealing glue to reinforce the battery casing and restore waterproof functionality, also at no cost to the vehicle owners [2][5] Group 3: Communication with Customers - BYD will notify affected customers through registered mail, phone calls, and text messages regarding the recall [5] - Customers can contact the BYD customer service hotline for inquiries and can also visit the State Administration for Market Regulation's recall center website for more information [5]

据国家市场监督管理总局消息，比亚迪汽车工业有限公司日前向国家市场监督管理总局备案了召回计划。 7x24h电报 头条新闻 VIP资讯 实时盯盘 一、召回编号S2025M0165I：自即日起， 召回2015年3月28日至2017年7月28日期间生产的2015款唐系列汽车，共计44535辆。 本次 召回范围内的部分车辆，由于元器件设计选型问题，可能导致驱动电机控制器在使用过程中，主动泄放功能异常。极端情况下，造成电路板 烧蚀，车辆纯电驱动模式失效，存在安全隐患。比亚迪汽车工业有限公司将委托授权经销商，免费为召回范围内的车辆更新软件，泄放方式 变更为电机泄放，以消除安全隐患。 二、召回编号S2025M0166I：自即日起， 召回2021年2月6日至2022年8月5日期间生产的部分元Pro纯电动汽车，共计71248辆。 本次 召回范围内的部分车辆，由于生产制造问题，可能导致动力电池密封垫安装不到位，引起密封性下降，若长时间高速涉水，可能造成动力电 池进水，绝缘性能下降。极端情况下，动力电池输出功率降低，存在安全隐患。比亚迪汽车工业有限公司将委托授权经销商，免费为召回范 围内的车辆使用专用密封胶补强动力电池壳体，恢复防水 ...

Group 1 - BYD Auto Industry Co., Ltd. has filed a recall plan with the State Administration for Market Regulation due to safety concerns related to certain vehicle models [1][2] - Recall number S2025M0165I involves 44,535 units of the 2015 Tang series produced between March 28, 2015, and July 28, 2017, due to potential issues with the drive motor controller that may lead to circuit board burning and loss of electric drive mode [1] - Recall number S2025M0166I includes 71,248 units of the Yuan Pro electric vehicles produced between February 6, 2021, and August 5, 2022, which may have battery sealing issues that could lead to water ingress and reduced insulation performance [1][2] Group 2 - The recalls are initiated following a defect investigation by the State Administration for Market Regulation [2] - BYD will authorize dealers to perform free software updates and apply specialized sealant to restore waterproof functionality in the affected vehicles [2]

Core Viewpoint - BYD Auto Industry Co., Ltd. has initiated a recall of 44,535 units of the 2015 Tang series vehicles due to potential safety hazards related to the design of component selection in the drive motor controller [1] Group 1: Recall Details - The recall affects vehicles produced between March 28, 2015, and July 28, 2017 [1] - The recall number is S2025M0165I, and it is conducted in accordance with the Regulations on the Recall of Defective Auto Products [1] Group 2: Safety Concerns - Some vehicles may experience abnormal active discharge functions, which could lead to circuit board burning and failure of the electric drive mode, posing safety risks [1] - The recall was initiated following a defect investigation launched by the State Administration for Market Regulation [1] Group 3: Remedial Actions - BYD will authorize dealers to update the software of the recalled vehicles for free, changing the discharge method to motor discharge to eliminate safety hazards [1]