Core Viewpoint - The introduction of the mandatory national standard "Requirements for the Restriction of Hazardous Substances in Electrical and Electronic Products" (GB 26572—2025) marks a significant reform in the management of hazardous substances in China's electrical and electronic products sector, set to be implemented on August 1, 2027, enhancing regulatory oversight and promoting consumer health and environmental safety [1][2]. Group 1: Regulatory Changes - The new standard specifies control over 10 hazardous chemical substances, including four heavy metals (lead, mercury, cadmium, hexavalent chromium) and six persistent organic pollutants (such as polybrominated biphenyls and phthalates), establishing mandatory limits for their presence in electrical and electronic products [1][2]. - The implementation of the standard will follow a "2+1" transitional plan, allowing a two-year transition period before the standard takes effect and a one-year grace period for the sale of existing inventory produced or imported before the standard's implementation [2]. Group 2: Industry Impact - As the world's largest producer and consumer of electrical and electronic products, China produced 563 million smartphones and 166 million microcomputer devices in the first half of 2025, highlighting the scale of the industry affected by these new regulations [2]. - The standard aims to encourage manufacturers to reduce and replace hazardous substances, thereby fostering the development of a greener supply chain in the electrical and electronic products sector [1][3]. Group 3: Global Context - The regulation aligns with global trends, as many economies, including the EU, the US, and Japan, have established similar controls on hazardous substances in electrical and electronic products since 2000, indicating a worldwide consensus on the need for such measures [3].

Core Points - The newly approved mandatory national standard for hazardous substance control in electrical and electronic products, GB 26572—2025, will be implemented on August 1, 2027, marking a significant regulatory advancement in the industry [1][3] - The standard expands the list of controlled substances from 6 to 10, adding 4 phthalate substances commonly used as plasticizers, which can pose health risks if used beyond specified limits [1][2] Group 1 - The introduction of the standard aims to enhance the reduction and substitution of hazardous substances by electrical and electronic product manufacturers, thereby improving the green supply chain and consumer health protection [2][3] - The standard requires the labeling of hazardous substances, disclosure of information, and retention of technical support documents to ensure traceability and verification of hazardous substance control results [2][3] - The standard aligns with international regulations, facilitating the integration of China's hazardous substance control with global standards, which is beneficial for international trade [2][3] Group 2 - A transition period of one year will be provided for products manufactured or imported before the standard's implementation, allowing companies to manage their existing inventory [3] - Companies are advised to optimize supply chain management, redesign products, and enhance detection capabilities for hazardous substances during the transition period [3] - The standard will be enforced strictly, with regulatory bodies conducting supervision and imposing penalties on non-compliant products to protect consumer rights [3][4] Group 3 - The Ministry of Industry and Information Technology plans to promote the application of the mandatory national standard and expand the types of electrical and electronic products and hazardous substances under China's RoHS control [4]

Group 1 - The core viewpoint of the article is the introduction of a new mandatory national standard in China for the control of harmful substances in electrical and electronic products, which will take effect on August 1, 2027 [1][2]. - The new standard, titled "Requirements for the Restriction of Harmful Substances in Electrical and Electronic Products" (GB 26572—2025), expands the list of controlled harmful substances from 6 to 10, including four heavy metals and six persistent organic pollutants [2]. - The standard aims to enhance consumer health protection, promote green industry development, and facilitate alignment with global market standards [2]. Group 2 - The Ministry of Industry and Information Technology emphasizes the importance of green management throughout the lifecycle of electrical and electronic products to reduce the use of harmful substances from the design and production stages [1]. - China is the world's largest producer and consumer of electrical and electronic products, with significant production figures reported for smartphones and microcomputer devices in the first half of 2025 [1]. - The new standard reflects the increasing demand for environmentally friendly products and the tightening of international regulations on harmful substances [2].

Core Viewpoint - The Ministry of Industry and Information Technology (MIIT) has introduced a mandatory national standard for limiting harmful substances in electrical and electronic products, aiming to enhance the green level and safety standards of these products, which are crucial for public health and environmental protection [1][2]. Group 1: Standard Overview - The new standard improves China's RoHS control system, establishing a governance framework that ensures standardized production, informed consumer choices, effective government regulation, and industry development [1][3]. - The standard includes three main components: limits on harmful substances, labeling requirements, and testing methods that align with international standards [3]. Group 2: Harmful Substance Management - The standard specifies limits for four heavy metals (lead, mercury, cadmium, hexavalent chromium) and six types of persistent organic pollutants, creating effective constraints for manufacturers [3][4]. - Products are categorized into two types: Type I includes frequently used consumer electronics that must meet strict limits and labeling requirements, while Type II includes other products that also require labeling but with less stringent controls [4]. Group 3: Implementation Timeline - The standard will have a two-year transition period, officially coming into effect on August 1, 2027, with an additional one-year grace period for existing inventory, allowing products produced or imported before the standard's implementation to be sold until August 1, 2028 [5].

Group 1 - The new mandatory national standard "Requirements for the Restriction of Harmful Substances in Electrical and Electronic Products" adds four phthalate substances to the list of controlled harmful substances, focusing on consumer health protection, industry green development, and global market integration [1][2] - The four phthalate substances are commonly used as plasticizers in electrical and electronic products, enhancing flexibility and processing performance, but their excessive use poses health risks and potential environmental pollution during disposal [1] - The implementation of this standard is expected to promote the reduction and substitution of phthalate substances, facilitating the green transformation and upgrading of the industry [1] Group 2 - The standard aligns with global market requirements as major economies like Europe, the US, Japan, and South Korea have also included these phthalate substances in their regulatory frameworks, helping Chinese electrical and electronic products to better comply with international standards [2] - By unifying the types of controlled harmful substances with major export markets, the standard aims to eliminate compliance barriers for Chinese products entering global markets [2]

Core Points - The first mandatory national standard for controlling harmful substances in electrical and electronic products in China has been released, set to be implemented on August 1, 2027 [1] - The standard aims to reduce health risks and environmental pollution by limiting the use of harmful substances throughout the product lifecycle [1] - The standard specifies limits for four heavy metals (lead, mercury, cadmium, hexavalent chromium) and six categories of persistent organic pollutants [1] - Testing methods for the ten harmful substances align with international standards, enhancing the competitiveness of China's electrical and electronic industry in global trade [1] Implementation Details - There will be a two-year transition period before the standard is officially implemented [2] - Products produced or imported before the implementation date will have a one-year grace period for inventory clearance, allowing sales until August 1, 2028 [2]

Core Viewpoint - The introduction of the mandatory national standard for harmful substances in electrical and electronic products aims to enhance consumer safety and environmental protection in response to the widespread use of these products in daily life [1][3]. Group 1: Standard Overview - The newly released standard titled "Requirements for the Restriction of the Use of Harmful Substances in Electrical and Electronic Products" is the first mandatory national standard in the field of harmful substance control in electrical and electronic products in China [1][4]. - The standard sets forth specific limits on harmful substances, including four heavy metals (lead, mercury, cadmium, hexavalent chromium) and six types of persistent organic pollutants [5][6]. Group 2: Implementation and Transition - The standard will officially take effect on August 1, 2027, with a transition period of two years and an additional one-year period for the disposal of existing inventory [6][7]. - During the transition period, companies are advised to optimize supply chain management, redesign products, and enhance detection and management capabilities for harmful substances [7]. Group 3: Regulatory Framework - The standard aims to create a governance framework where production is standardized, consumer purchases are informed, and government oversight is strengthened, thereby promoting the production of greener products by electrical and electronic companies [3][5]. - The standard's development involved extensive research and collaboration with various governmental departments, including over 80 surveys and 100 technical discussions [5].

Core Viewpoint - The introduction of the mandatory national standard for harmful substances in electrical and electronic products aims to enhance consumer safety and environmental protection, addressing the growing concerns over the use of hazardous materials in everyday devices [1][5]. Group 1: Standard Overview - The newly released standard, titled "Requirements for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products," is the first mandatory national standard in this field in China [1]. - The standard is expected to improve the RoHS control system in China, ensuring that manufacturers produce compliant products and consumers can make informed purchasing decisions [5][7]. Group 2: Key Requirements - The standard specifies limits for four heavy metals (lead, mercury, cadmium, hexavalent chromium) and six types of persistent organic pollutants, establishing mandatory thresholds for their presence in electronic products [7]. - It mandates labeling requirements to ensure traceability and verification of hazardous substance management, allowing consumers to access information about harmful substances in products through digital means [7]. - Testing methods for ten hazardous substances are aligned with international standards, facilitating trade and enhancing the international competitiveness of China's electronic products [7][8]. Group 3: Implementation Timeline - The standard will officially take effect on August 1, 2027, with a two-year transition period and an additional one-year period for the disposal of existing inventory [8][11]. - During the transition, companies are advised to optimize supply chain management, redesign products to eliminate harmful materials, and enhance their testing and management capabilities [11].

Core Points - The first mandatory national standard for hazardous substance control in electrical and electronic products in China, GB 26572-2025, has been approved and will be implemented on August 1, 2027 [1][2] - The standard aims to regulate ten hazardous chemical substances, including four heavy metals and six persistent organic pollutants, to enhance the green supply chain and protect consumer health and environmental risks [1][2] - The standard encourages the use of digital technologies for labeling hazardous substances, promoting the green and digital transformation of the electrical and electronic industry [2][3] Summary by Sections Standard Implementation - The standard was proposed by the Ministry of Industry and Information Technology and developed in collaboration with over 60 organizations, including manufacturers and research institutions [1] - It establishes mandatory requirements for the content of hazardous substances in electrical and electronic products [1][2] Hazardous Substance Control - The standard specifies the control of ten hazardous substances, including lead, mercury, cadmium, hexavalent chromium, and various organic pollutants [1][2] - It aligns with international regulations, facilitating the international trade of Chinese electrical and electronic products [2][3] Regulatory Framework - The introduction of this mandatory standard marks a significant step in enhancing the regulatory framework for hazardous substance control in China [3] - Future efforts will focus on expanding the types of products and hazardous substances under the China RoHS control mechanism [3]