2025年12月18日理想材料负责人段吉超表示 左下角是沃尔沃的车身热成型比例变迁图，热成型的比例从个位数一直上升到38%，后来几乎没有再突破了（再说个小知识，这38%中只有33% 是1500MPa以上超高强钢。因为，热成型不都是1500MPa以上，也有几百MPa的、局部吸能少量使用，后略）。 干货分享【热成型钢用量越大，车身越安全？】 之前在网络上经常看到类似的话，大概就是哪个车的热成型钢比例高，所以它一定更安全。恰恰在各个车企的发布会上，热成型钢又是曝光度很 高的点，大概是因为简单的观点，往往传播力更强。 最近，恰巧我在北京总部举办了"材料技术日"活动，被不少媒体朋友问到这个点，今天就简单分享下。 先说结论，我认为这句话不严谨、不正确。 1、「热成型钢的使用原因」 热成型钢的定义我们不赘述了，通常大家理解的大概是车身上强度高达1500MPa-2000MPa的钢材（其实有些冷冲压、冷辊压也能到这个级别， 此处略）。我们使用它的主要原因，确实主要是因为它的强度高。把它用在车身碰撞传力路径的安全结构件，可以起到防止碰撞时过度变形、入侵乘员生 存空间的作用。 2、「为什么车身热成型比例没有一直往上走？」 其实，严 ...

Financial Performance - In the first three quarters of 2025, the company achieved total revenue of CNY 95.048 billion and a total profit of CNY 4.229 billion, with a net profit growth of 33.64% year-on-year [3] - In Q3 2025, the company reported a total profit of CNY 1.246 billion and a net profit of CNY 1.054 billion, marking a 73.22% increase compared to Q3 2024 [3][13] - The company's financial costs decreased by 89.56% year-on-year, and the asset-liability ratio dropped by 0.48 percentage points since the beginning of the year [4] Market Conditions - The steel industry continues to face supply-demand imbalances, with raw material prices rising significantly; iron ore prices increased by 4.37% and coking coal prices by 11.09% in Q3 [3] - Steel sales volume in the first half of 2025 was 11.1 million tons, a decrease of 12.6% year-on-year [11] Strategic Initiatives - The company is focusing on high-end, intelligent, and green transformation, with significant investments in product structure optimization and high-end product development [5][7] - The company has made progress in its silicon steel project, with expectations of reduced losses and improved profitability in 2025 [8] - VAMA's automotive steel project is advancing, with plans for new high-performance steel introductions and a focus on green low-carbon development [9] Production and Operations - The company has developed over 160 high-strength, high-toughness, and high-corrosion-resistant products in the industrial bar and rod sector, achieving full coverage in five key areas [3] - The company is implementing cost reduction measures, with a focus on optimizing procurement channels and reducing energy costs [3] Future Outlook - The company plans to continue enhancing cost efficiency and aims to maintain a profit margin of CNY 200-300 per ton above average for specialty steel products [6] - The steel industry is expected to see continued supply-side reforms, with policies emphasizing green transformation and capacity reduction [12]

Financial Performance - In the first three quarters of 2025, the company achieved total revenue of 950.48 million yuan, with a net profit of 42.29 million yuan, representing a year-on-year growth of 33.64% [3] - In Q3 2025, the company reported a total profit of 12.46 million yuan and a net profit of 10.54 million yuan, with a year-on-year increase of 73.22% [3] - The company's financial expenses decreased by 89.56% year-on-year, and the asset-liability ratio dropped by 0.48 percentage points compared to the beginning of the year [3] Market Conditions - The steel industry continues to face supply-demand imbalances, with raw material prices rising significantly; iron ore prices increased by 4.37% and coking coal prices by 11.09% in Q3 [3] - The company’s steel sales volume in the first half of 2025 was 11.1 million tons, a decrease of 12.6% year-on-year [6] Strategic Initiatives - The company is focusing on high-end, intelligent, and green transformation, with projects like the large-diameter seamless steel pipe production line expected to start in early 2026 [4] - The company has developed over 160 high-strength and high-toughness products in the industrial bar and rod sector, achieving five domestic firsts [3] Investor Relations - The company has increased cash dividends and conducted share buybacks to enhance shareholder returns, with a cash dividend ratio rising from 21% in 2021 to 34% in 2024 [11] - Long-term capital investment in the company has shown a rising trend [5] Environmental Compliance - The company has completed all ultra-low emission transformation projects and submitted evaluation reports, with verification expected to be completed by the end of November [11] - The company is actively addressing downstream lightweight emission reduction needs, having released an Environmental Product Declaration (EPD) for seamless steel pipe products [4] Future Outlook - The company plans to continue reducing costs and increasing efficiency, aiming for continuous improvement in iron water costs compared to industry benchmarks [5] - The company is committed to developing high-performance steel products to meet the needs of the manufacturing sector, with a target to maintain a profit margin of 200-300 yuan per ton over standard materials [5]

Financial Performance - The company's income tax expenses increased year-on-year in Q1 2025 due to profit growth and tax reconciliation, while other income decreased, impacting overall profitability [2] - The effective corporate income tax rate remains at 15% for high-tech enterprises, with expectations for Q2 tax expenses and VAT deductions to stabilize [2] Market Strategy - The subsidiary Yangchun New Steel maintains a low-cost operational strategy, achieving a leading market share and sales price in Guangdong despite the downturn in the real estate sector [2][3] - The company has no immediate strategic adjustments planned, focusing on maintaining profitability in the rebar market [3] Export and Trade Impact - The company's export volume to the U.S. is minimal, accounting for only 0.8% of total exports in 2024, with overseas revenue making up about 7% of total income [4] - The company continues to monitor international trade policies and adjust its export strategies accordingly [4] Environmental Initiatives - The company is on track to complete ultra-low emission upgrades by the end of June 2025, aiming for an environmental performance rating of A by year-end [5] - Capital expenditures for 2025 are projected at 5.467 billion yuan, focusing on product structure upgrades and digital transformation [5] Product Development - The first phase of the silicon steel project has reached full production capacity, contributing positively to the company's performance [6][7] - The automotive sheet joint venture has achieved full production, with plans for further development and product certification [7] Financial Returns - For 2024, the company plans to distribute a cash dividend of 1.00 yuan per 10 shares, representing 34% of net profit, an increase of 2.7 percentage points from the previous year [5] - The total planned share buyback and dividend payout will account for 44%-54% of the company's net profit for 2024 [5]